How to identify bentonite


Release time:

2024-05-24

In the naked eye identification, high quality bentonite is pure white, generally there are gray or no yellow white, often due to water absorption or containing impurities and was light green, light green, rose red and other colors. It is still pure white, gray or light yellow white after air drying. After being broken by hand, the section is uneven and jelly-like. There is grease luster, hand touch with slippery feeling. Can absorb water expansion, good can become colloidal. If the water is lost after long-term air drying, it can become loose again. Bentonite has a strong ion exchange force, so it can absorb or absorb a variety of colors. Mix it with grease to make the grease smoother. Its fine powder is added to the water suspension, dispersion (divergence) is very good, not easy to precipitate. Natural bentonite type, mainly according to the relative content of the type of cation montmorillonite is divided into calcium, sodium, hydrogen, hectorite, etc., which is mainly calcium montmorillonite clay called calcium bentonite. Most of the bentonite ore in China is mainly to produce calcium-based bentonite, calcium-based bentonite is cheaper than sodium-based bentonite, and easy to get.

But only by the above introduction of the naked eye and other sensory identification is not accurate enough. There is no unified national standard for identification of bentonite in China. Most mines implement the "Ministerial Standards for Bentonite and Clay for Foundry"(1997) and enterprise standards. The main determination of blue absorption, moisture, colloid medium, through rate, wet pressure strength, expansion coefficient, PH value, etc., determination methods and standards are omitted here.

There are more than 20 bentonite mining plants in counties and more than 100 bentonite mining plants run by community teams, and most provinces (autonomous regions) have them. Most counties (cities) in the country have bentonite in building materials companies or material shopping malls. Small factories engaged in sand turning in rural market towns generally use bentonite. Those with less dosage can be contacted with them, but the quality must be paid attention.

The content comes from the network, if you have any questions, please contact this site to delete.

Previous Page

Next Page

Previous Page

Next Page